Royal mail - Order in
DPD - Order in
0.8Ω · 2ml · Top Fill
SS 0.8 Ohm OXVA Xlim V3 replacement pods are a 2ml top-fill resistance variant in the OXVA XLIM V3 refillable cartridge family.
Each pack contains three cartridges with a built-in coil. The device and e-liquid are separate, so choose the resistance and compatibility route before filling a new pod.
It is a top-fill replacement pod and a built-in coil cartridge; the variant changes resistance, capacity or SS compatibility rather than supplying a prefilled flavour.
Compare the full cartridge range on the OXVA Xlim V3 Replacement Pods page.
How Does SS 0.8 Ohm OXVA Xlim V3 Pods Taste?
SS 0.8 Ohm OXVA Xlim V3 Pods The SS 0.8Ω variant is a device-specific stainless-steel cartridge, not a flavour variation and not the same ordering choice as the standard 0.8Ω V3 pod. OXVA lists it for XLIM hardware with Anti-Burn technology.
Its key distinction is therefore the cartridge system. OXVA explains that the DNA chip uses the temperature-sensitive stainless-steel coil for Anti-Burn behaviour and warns that non-Anti-Burn XLIM devices are incompatible with the SS cartridges.
- Dominant note: Anti-Burn-only SS 0.8Ω cartridge
- Supporting note: 0.8Ω stainless-steel option for the DNA cartridge system
- Finish: A device-specific SS choice, not the standard 0.8Ω V3 pod
- Best for: Choose this variant when your compatible Anti-Burn/DNA XLIM setup calls for the SS 0.8Ω cartridge rather than the normal 0.8Ω top-fill pod.
Compare the closest resistance variants:
- SS 0.6 Ohm OXVA Xlim V3 Pods — moves to the 0.6Ω stainless-steel option while keeping the Anti-Burn-only cartridge system.
- SS 1.2 Ohm OXVA Xlim V3 Replacement Pods — moves to the 1.2Ω stainless-steel option while keeping the Anti-Burn-only cartridge system.
- 0.8 Ohm Xlim V3 Replacement Pods — is the standard 0.8Ω V3 cartridge; it is a different compatibility path from the SS/DNA pod.
Specifications for SS 0.8 Ohm OXVA Xlim V3 Pods
- Resistance VariantSS 0.8 Ohm — Anti-Burn/DNA device only
- Pack Format3 cartridges per pack
- Cartridge Capacity2ml
- Refill MethodTop fill
This is an empty refillable replacement cartridge with an integrated coil; it does not include a device or e-liquid.
| Specification | Detail |
|---|---|
| Variant | SS 0.8 Ohm |
| Resistance | 0.8Ω |
| Capacity | 2ml |
| Pack format | 3 cartridges per pack |
| Refill method | Top fill |
| Coil | Built into each cartridge |
| Draw direction | Anti-Burn/DNA device only |
| Power guidance | Device-controlled |
| E-liquid direction | suitable e-liquid for the compatible Anti-Burn device |
Which Devices Work With OXVA Xlim V3 Pods?
For OXVA Xlim V3 Pods, OXVA states that its stainless-steel XLIM DNA cartridges are for Anti-Burn devices only. Do not treat an SS cartridge as a universal replacement for a standard XLIM device simply because the resistance number matches.
| Device or Format | Compatible? | What to Know |
|---|---|---|
| Compatible Anti-Burn / DNA XLIM device | Yes | Use the exact SS resistance specified for the supported Anti-Burn system. |
| Standard, non-Anti-Burn XLIM device | No | OXVA warns that SS cartridges are incompatible with non-Anti-Burn XLIM kits. |
| OXVA XLIM C | No | The standard V3 family is separately excluded from XLIM C compatibility; use the cartridge system specified for XLIM C. |
Use the OXVA Xlim V3 Replacement Pods page to compare the cartridge family before choosing a resistance.
How to Use OXVA Xlim V3 Pods
OXVA Xlim V3 Pods use a top-fill port and an integrated coil. Follow the exact pod and device instructions for your setup.
- Check the variant. Confirm the pack shows the resistance, capacity and SS marking where applicable before opening it.
- Open the refill port. Fill slowly with suitable e-liquid without forcing liquid into the airflow path.
- Close and prime. Reseal the port and give a fresh cartridge time to saturate before normal use.
- Fit the cartridge. Insert it only into a compatible XLIM device and use supported power settings.
- Replace when worn. Change the cartridge if normal refilling no longer restores flavour, wicking or vapour performance.
Vape and Go's Expert Advice on OXVA Xlim V3 Pods
Four checks that matter for this resistance child page:
- Start with the device model. For SS 0.8Ω, compatibility is more important than the resistance number: OXVA restricts the cartridge to Anti-Burn hardware.
- Do not swap in standard pods by name. Standard 0.8Ω V3 and SS 0.8Ω are distinct cartridge choices even though both carry the XLIM and 0.8Ω labels.
- Let the DNA system do its job. The stainless-steel coil is used by the DNA system for temperature-sensitive Anti-Burn behaviour, so the matching device is part of the setup.
- Refill through the top port. Fill the 2ml cartridge as designed, reseal it and give the wick time to saturate before normal use.
Buyer Questions on OXVA Xlim V3 Pods
Do OXVA Xlim V3 Pods SS Cartridges Need an Anti-Burn Device?
Yes. OXVA specifies the stainless-steel DNA cartridges for compatible XLIM devices with Anti-Burn technology and warns against use with non-Anti-Burn XLIM devices.
Do OXVA Xlim V3 Pods SS Cartridges Include E-Liquid?
No. These are refillable replacement cartridges. E-liquid and the compatible device are separate.
Can OXVA Xlim V3 Pods SS Cartridges Replace Standard V3 Pods?
Not as a universal swap. The SS cartridge has an Anti-Burn/DNA compatibility requirement, so follow the exact cartridge specification for your device.
