0.4Ω · 3ml · Top Fill
0.4 Ohm 3ml OXVA Xlim V3 replacement pods are a 3ml top-fill resistance variant in the OXVA XLIM V3 refillable cartridge family.
Each pack contains three cartridges with a built-in coil. The device and e-liquid are separate, so choose the resistance and compatibility route before filling a new pod.
It is a top-fill replacement pod and a built-in coil cartridge; the variant changes resistance, capacity or SS compatibility rather than supplying a prefilled flavour.
Compare the full cartridge range on the OXVA Xlim V3 Replacement Pods page.
How Does 0.4 Ohm 3ml OXVA Xlim V3 Pods Taste?
0.4 Ohm 3ml OXVA Xlim V3 Pods This 3ml version keeps the 0.4Ω loose-RDL resistance profile while changing the cartridge capacity. OXVA lists its 3ml top-fill cartridge in the same four resistance choices, and the 0.4Ω match remains the 26–30W, more open end of the range.
The extra capacity does not create a different e-liquid flavour; it changes how much liquid the cartridge can hold. That separates it from the 2ml 0.4Ω page, while the resistance still points towards a looser RDL draw and compatible freebase or nic salt e-liquid.
- Dominant note: Loose RDL at 26–30W with 3ml capacity
- Supporting note: Same 0.4Ω resistance class with a larger cartridge body
- Finish: Top-fill 3ml format for the most open standard V3 resistance
- Best for: Choose this variant when you specifically want the 0.4Ω RDL profile in the manufacturer-listed 3ml top-fill format.
Compare the closest resistance variants:
- 0.4 Ohm OXVA Xlim V3 Pods — keeps the same 0.4Ω resistance while changing the cartridge capacity to 2ml.
- 0.6 Ohm 3ml OXVA Xlim V3 Replacement Pods — shifts the choice to balanced rdl/mtl at 20–25w with 3ml capacity.
- 0.8 Ohm 3ml Xlim V3 Replacement Pods — shifts the choice to mtl at 12–18w with 3ml capacity.
Specifications for 0.4 Ohm 3ml OXVA Xlim V3 Pods
- Resistance Variant0.4 Ohm 3ml — Loose RDL
- Pack Format3 cartridges per pack
- Cartridge Capacity3ml
- Refill MethodTop fill
This is an empty refillable replacement cartridge with an integrated coil; it does not include a device or e-liquid.
| Specification | Detail |
|---|---|
| Variant | 0.4 Ohm 3ml |
| Resistance | 0.4Ω |
| Capacity | 3ml |
| Pack format | 3 cartridges per pack |
| Refill method | Top fill |
| Coil | Built into each cartridge |
| Draw direction | Loose RDL |
| Power guidance | 26–30W |
| E-liquid direction | freebase or nic salt e-liquid |
Which Devices Work With OXVA Xlim V3 Pods?
For OXVA Xlim V3 Pods, standard V3 top-fill cartridges work across many XLIM devices, but compatibility is not universal. OXVA specifically excludes XLIM C and gives the 0.4Ω cartridge a narrower device-support note on its UK V3 page.
| Device or Format | Compatible? | What to Know |
|---|---|---|
| Compatible XLIM V3 devices | Yes | OXVA lists current models including XLIM Pro 3, XLIM 3 Ultra, XLIM SQ Pro 2, XLIM Go 2 and XLIM Go Lite among supported V3 devices. |
| OXVA XLIM C | No | OXVA excludes XLIM C from V3 cartridge compatibility. |
| 0.4Ω V3 cartridge | Check device | OXVA gives 0.4Ω a separate support note, so confirm the exact XLIM model before ordering this resistance. |
Use the OXVA Xlim V3 Replacement Pods page to compare the cartridge family before choosing a resistance.
How to Use OXVA Xlim V3 Pods
OXVA Xlim V3 Pods use a top-fill port and an integrated coil. Follow the exact pod and device instructions for your setup.
- Check the variant. Confirm the pack shows the resistance, capacity and SS marking where applicable before opening it.
- Open the refill port. Fill slowly with suitable e-liquid without forcing liquid into the airflow path.
- Close and prime. Reseal the port and give a fresh cartridge time to saturate before normal use.
- Fit the cartridge. Insert it only into a compatible XLIM device and use supported power settings.
- Replace when worn. Change the cartridge if normal refilling no longer restores flavour, wicking or vapour performance.
Vape and Go's Expert Advice on OXVA Xlim V3 Pods
Four checks that matter for this resistance child page:
- Confirm both size and resistance. This page is for the 3ml 0.4Ω cartridge, so check both markings rather than ordering by resistance alone.
- Use a compatible 0.4Ω device. The loose-RDL, 26–30W resistance still needs a device that explicitly supports the 0.4Ω V3 cartridge.
- Allow for the larger reservoir. The 3ml body changes capacity, not the basic 0.4Ω resistance behaviour, so keep your power and draw choice resistance-led.
- Top fill without overfilling. Use the refill port, leave a small air space and give a fresh built-in coil time to saturate before vaping.
Buyer Questions on OXVA Xlim V3 Pods
Do OXVA Xlim V3 Pods Include E-Liquid?
No. The pack contains refillable replacement cartridges with built-in coils; e-liquid and the vape device are separate.
Can OXVA Xlim V3 Pods Use Nic Salts?
Yes, OXVA supports nic salt use in the V3 cartridge family. Match the liquid to the resistance and device rather than treating every resistance identically.
When Should OXVA Xlim V3 Pods Be Replaced?
Replace a cartridge when persistent burnt or muted flavour, poor wicking or reduced vapour remains after normal refilling. The coil is built into the pod.
