Royal mail - Order in
DPD - Order in
0.4Ω · 2ml · Top Fill
0.4 Ohm OXVA Xlim V3 replacement pods are a 2ml top-fill resistance variant in the OXVA XLIM V3 refillable cartridge family.
Each pack contains three cartridges with a built-in coil. The device and e-liquid are separate, so choose the resistance and compatibility route before filling a new pod.
It is a top-fill replacement pod and a built-in coil cartridge; the variant changes resistance, capacity or SS compatibility rather than supplying a prefilled flavour.
Compare the full cartridge range on the OXVA Xlim V3 Replacement Pods page.
How Does 0.4 Ohm OXVA Xlim V3 Pods Taste?
0.4 Ohm OXVA Xlim V3 Pods Resistance does not add a flavour of its own; the e-liquid supplies the taste. This 0.4Ω cartridge changes how that liquid is delivered, with a loose RDL setup at 26–30W and the most open draw in the standard V3 resistance set.
Vape and Go pairs this option with 50/50 or 70VG/30PG e-liquid. Compared with 0.6Ω, it moves further towards airflow and vapour output, so the device must specifically support the 0.4Ω V3 cartridge before you order.
- Dominant note: Loose RDL at 26–30W
- Supporting note: Lower-resistance option for a more open draw
- Finish: Higher vapour output than the higher-resistance V3 options
- Best for: Choose this variant when a loose RDL draw and the highest standard V3 wattage range are the priority.
Compare the closest resistance variants:
- 0.6 Ohm OXVA Xlim V3 Pods — shifts the choice to balanced rdl/mtl at 20–25w.
- 0.4 Ohm 3ml OXVA Xlim V3 Replacement Pods — keeps the same 0.4Ω resistance while changing the cartridge capacity to 3ml.
- 0.8 Ohm Xlim V3 Replacement Pods — shifts the choice to mtl at 12–18w.
Specifications for 0.4 Ohm OXVA Xlim V3 Pods
- Resistance Variant0.4 Ohm — Loose RDL
- Pack Format3 cartridges per pack
- Cartridge Capacity2ml
- Refill MethodTop fill
This is an empty refillable replacement cartridge with an integrated coil; it does not include a device or e-liquid.
| Specification | Detail |
|---|---|
| Variant | 0.4 Ohm |
| Resistance | 0.4Ω |
| Capacity | 2ml |
| Pack format | 3 cartridges per pack |
| Refill method | Top fill |
| Coil | Built into each cartridge |
| Draw direction | Loose RDL |
| Power guidance | 26–30W |
| E-liquid direction | 50/50 or 70VG/30PG e-liquid |
Which Devices Work With OXVA Xlim V3 Pods?
For OXVA Xlim V3 Pods, standard V3 top-fill cartridges work across many XLIM devices, but compatibility is not universal. OXVA specifically excludes XLIM C and gives the 0.4Ω cartridge a narrower device-support note on its UK V3 page.
| Device or Format | Compatible? | What to Know |
|---|---|---|
| Compatible XLIM V3 devices | Yes | OXVA lists current models including XLIM Pro 3, XLIM 3 Ultra, XLIM SQ Pro 2, XLIM Go 2 and XLIM Go Lite among supported V3 devices. |
| OXVA XLIM C | No | OXVA excludes XLIM C from V3 cartridge compatibility. |
| 0.4Ω V3 cartridge | Check device | OXVA gives 0.4Ω a separate support note, so confirm the exact XLIM model before ordering this resistance. |
Use the OXVA Xlim V3 Replacement Pods page to compare the cartridge family before choosing a resistance.
How to Use OXVA Xlim V3 Pods
OXVA Xlim V3 Pods use a top-fill port and an integrated coil. Follow the exact pod and device instructions for your setup.
- Check the variant. Confirm the pack shows the resistance, capacity and SS marking where applicable before opening it.
- Open the refill port. Fill slowly with suitable e-liquid without forcing liquid into the airflow path.
- Close and prime. Reseal the port and give a fresh cartridge time to saturate before normal use.
- Fit the cartridge. Insert it only into a compatible XLIM device and use supported power settings.
- Replace when worn. Change the cartridge if normal refilling no longer restores flavour, wicking or vapour performance.
Vape and Go's Expert Advice on OXVA Xlim V3 Pods
Four checks that matter for this resistance child page:
- Confirm 0.4Ω support. The 0.4Ω pod has the highest standard V3 wattage range, so check your exact XLIM device supports this resistance before filling it.
- Match the draw first. Use this option for a loose RDL direction; move to 0.6Ω or above if you want a more restricted inhale.
- Choose liquid deliberately. Vape and Go lists 50/50 or 70VG/30PG liquid for 0.4Ω, so match the bottle to the pod rather than assuming every liquid suits every resistance.
- Prime a fresh cartridge. After top filling, let a new pod saturate before use and replace it if a persistent burnt taste develops.
Buyer Questions on OXVA Xlim V3 Pods
Do OXVA Xlim V3 Pods Include E-Liquid?
No. The pack contains refillable replacement cartridges with built-in coils; e-liquid and the vape device are separate.
Can OXVA Xlim V3 Pods Use Nic Salts?
Yes, OXVA supports nic salt use in the V3 cartridge family. Match the liquid to the resistance and device rather than treating every resistance identically.
When Should OXVA Xlim V3 Pods Be Replaced?
Replace a cartridge when persistent burnt or muted flavour, poor wicking or reduced vapour remains after normal refilling. The coil is built into the pod.
