What are Xlim ABT pods?
They are OXVA's refillable Xlim cartridges with a built-in UNITECH 3.0 mesh coil and ABT anti-burn technology. In an ABT-compatible device they help prevent dry hits by stopping the coil firing when the e-liquid runs low.
Same-Day Dispatch up to 9pm, 7 Days a Week
Free UK delivery (orders over £35)
Lowest Price Guaranteed Always
For Delivery Tomorrow — order
before
Royal mail - Order in
3h 3m 48s
DPD - Order in
0h 3m 48s
Free UK delivery (orders over
£35)
Pay in 3 interest-free payments on purchases from £30-£2,000.
Learn More
Pay in 3 interest-free payments on purchases from
£30-£2,000.
Learn More
Oxva Xlim ABT UNITECH 3.0 Replacement Pods are refillable 2ml top-fill cartridges with a built-in UNITECH 3.0 mesh coil and OXVA's ABT anti-burn technology, sold in packs of three.
Each pod has a built-in UNITECH 3.0 mesh coil, a 2ml capacity and a colour-coded base, and in an ABT-compatible device such as the OXVA Xlim Pro 4 it switches on anti-burn protection to stop dry hits.
The Oxva Xlim ABT UNITECH 3.0 Replacement Pods are the newest OXVA Xlim pods – refillable cartridges for the Xlim range, built around OXVA's latest UNITECH 3.0 mesh coil. Each pack contains three empty 2ml pods in one resistance, ready to fill with your favourite nic salt or 50/50 freebase e-liquid.
What makes these pods different is ABT (Anti-Burn Technology). Fitted in the OXVA Xlim Pro 4 or another ABT-compatible Xlim device, the pod lets the kit read how much e-liquid is left. When it runs low, the screen shows a "Please Fill The Pod" alert and the device stops firing before the coil can burn, so you get no dry hits and your pods last longer.
UNITECH 3.0 brings fast wicking, so a freshly filled pod is ready in around 30 seconds, along with OXVA's upgraded anti-leak design and smooth, consistent flavour from the mesh coil. The easy top-fill port means you can refill without fuss.
Four resistances cover every vaping style: 0.8Ω and 1.2Ω for a tight mouth-to-lung (MTL) draw, and 0.4Ω and 0.6Ω for a looser restricted direct-to-lung (RDTL) vape. Need standard pods for an older kit? Take a look at our OXVA Xlim V3 pods.
The table below lists the Oxva Xlim ABT UNITECH 3.0 pod specifications based on the manufacturer's information for the UK (TPD) version.
| Component | Specification | What That Means in Practice |
|---|---|---|
| Brand | OXVA | Coil is built in; no fitting or separate purchase required |
| Product | Xlim ABT Cartridge UNITECH 3.0 | Coil is built in; no fitting or separate purchase required |
| Pod Type | Refillable top-fill cartridge | Coil is built in; no fitting or separate purchase required |
| Capacity | 2ml (UK TPD) | Coil is built in; no fitting or separate purchase required |
| Coil | Built-in UNITECH 3.0 mesh coil | Coil is built in; no fitting or separate purchase required |
| Resistances | 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω | Coil is built in; no fitting or separate purchase required |
| Wattage | 0.4Ω 26–30W · 0.6Ω 20–25W · 0.8Ω 12–16W · 1.2Ω 10–12W | Coil is built in; no fitting or separate purchase required |
| Vaping Style | MTL (0.8Ω, 1.2Ω) and RDTL (0.4Ω, 0.6Ω) | Coil is built in; no fitting or separate purchase required |
| Anti-Burn | ABT smart liquid-level detection (ABT-compatible devices) | Coil is built in; no fitting or separate purchase required |
| E-Liquid | Nic salt and 50/50 freebase | Coil is built in; no fitting or separate purchase required |
| Dimensions | 24.3 x 13.8 x 34.1mm | Coil is built in; no fitting or separate purchase required |
| Pack Size | 3 pods | Coil is built in; no fitting or separate purchase required |
| Pod Lifespan | Around 2–3 weeks per pod | Coil is built in; no fitting or separate purchase required |
All Oxva Xlim ABT UNITECH 3.0 pods sold by Vape and Go are the UK TPD-compliant 2ml version.
Each pack of Oxva Xlim ABT UNITECH 3.0 Replacement Pods brings OXVA's newest pod technology to your Xlim kit:
Each resistance gives a different draw and vapour level, so pick the one that suits how you like to vape. Every pod has a colour-coded base to make it easy to tell them apart.
MTL Vaping — 0.8Ω & 1.2Ω
A tighter, cigarette-like draw with a satisfying throat hit and discreet vapour. Ideal for nic salts and smokers making the switch.
RDTL Vaping — 0.4Ω & 0.6Ω
A looser, airier draw with warmer vapour and fuller flavour. Best with lower-strength nic salts or 50/50 freebase.
RDTL vaping at 26–30W for the warmest vapour and biggest clouds. Best with lower-strength e-liquids.
A balanced RDTL or loose MTL draw at 20–25W with strong flavour and generous vapour.
Classic everyday MTL vaping at 12–16W – the go-to choice for nic salts.
The tightest, most cigarette-like MTL draw at 10–12W with discreet vapour.
Setting up a new pod only takes a minute:
Step 1: Lift the silicone stopper on the top-fill port of the pod.
Step 2: Fill with nic salt or 50/50 freebase e-liquid to just below the top of the 2ml chamber, then press the stopper back in firmly.
Step 3: Push the pod into your Xlim device until it clicks into place.
Step 4: Wait around 30 seconds so the UNITECH 3.0 coil can soak up the e-liquid.
Step 5: If your device has adjustable wattage, set it to the range printed on the base of the pod, then start vaping.
Most pod problems are quick to fix. Try these checks first:
ABT has detected low e-liquid and stopped the device firing. Refill the pod and you can carry on vaping.
Remove the pod, wipe the contacts on the base and on the device, then push it back in firmly until it clicks.
Check the wattage matches the range printed on the pod base, give new pods time to prime, and replace the pod once it is 2–3 weeks old.
Make sure the silicone stopper is pushed in fully after filling and avoid overfilling past the top of the chamber.
ABT pods look very similar to standard Xlim top-fill pods, but there are a few important differences:
Xlim ABT UNITECH 3.0 Pods
Four contact points on the base, an ABT mark underneath and a red silicone ring at the mouthpiece. In an ABT-compatible device such as the Xlim Pro 4, they switch on anti-burn protection.
Standard Xlim Pods
No ABT contacts or red ring. They do not provide anti-burn protection, so a dry hit can still happen if the pod runs empty.
| Feature | Xlim ABT Pod | Standard Xlim Pod |
|---|---|---|
| Anti-burn protection | Yes, in ABT-compatible devices | No |
| Coil | UNITECH 3.0 mesh | Built-in mesh coil |
| Base | Four contacts + ABT mark | Standard contacts |
| Mouthpiece | Red silicone ring | No red ring |
| Refill alert | Yes, on ABT devices | No |
Each pack contains:
Pods are supplied empty – e-liquid and device are sold separately.
The Oxva Xlim ABT UNITECH 3.0 Pods are the natural partner for the OXVA Xlim Pro 4, unlocking its anti-burn protection so every pod lasts as long as possible.
They are designed for adult vapers who want reliable, great-tasting refillable pods with protection against dry hits – whether you prefer a tight MTL draw with nic salts or a looser RDTL vape.
Not sure which resistance to choose or whether these pods suit your device? Our team of vape specialists is always happy to help – get in touch with us and we will point you in the right direction.
They are OXVA's refillable Xlim cartridges with a built-in UNITECH 3.0 mesh coil and ABT anti-burn technology. In an ABT-compatible device they help prevent dry hits by stopping the coil firing when the e-liquid runs low.
They are designed for the OXVA Xlim Pro 4 and other ABT-compatible Xlim devices. The anti-burn protection only works when the pod is used in an ABT-compatible device.
Each pack contains three empty 2ml pods in the resistance you choose.
Choose 0.8Ω or 1.2Ω for a tight MTL draw with nic salts, or 0.4Ω or 0.6Ω for a looser RDTL vape with more vapour.
0.4Ω at 26–30W, 0.6Ω at 20–25W, 0.8Ω at 12–16W and 1.2Ω at 10–12W. The range is also printed on the base of every pod.
Typically around 2–3 weeks, depending on how much you vape, your wattage and your e-liquid. Replace the pod when the flavour fades or tastes burnt.
No. The UNITECH 3.0 coil is built into the pod, so you simply replace the whole pod when it wears out.
ABT pods have four contact points on the base, an ABT mark underneath and a red silicone ring at the mouthpiece.
Yes. The pods work with both nic salts and 50/50 freebase e-liquids.
Yes. The UK version has a 2ml capacity and is TPD compliant for sale to adults aged 18 and over.
Free UK delivery
Same day dispatch
Exceptional Service
Customer support
