66cdd89e02254.webp)
Pay in 3 interest-free payments on purchases from £30-£2,000.Learn More
GeekVape Sonder Q pods deliver reliable performance with a 2 ml TPD-compliant capacity and a built-in mesh coil. Available in 0.4, 0.6, 0.8, and 1.2 Ω options, they let you choose between stronger flavour, denser vapour, or a smooth MTL draw. Each pack contains 3 pods designed for ease of use, leak resistance, and full compatibility with the GeekVape Sonder Q and other Q-series devices.
Sonder Q pods are refillable cartridges made for the GeekVape Sonder range, including the Sonder Q and Sonder Q2 kits. Each pod holds 2 ml of e-liquid to meet UK TPD rules and has a built-in mesh coil. You don’t replace coils separately—once flavour fades or the coil wears out, you swap the whole pod.
These pods are compatible with both 50/50 vape juice and nicotine salts, allowing you to pick the option that matches your style. The mesh coil heats evenly, keeping vapour consistent and flavour smooth for both tighter MTL draws and more open RDL styles.
The design also focuses on durability. Sonder Q pods use strong, lightweight materials and a leak-resistant system that keeps refills clean. Depending on the resistance, you either snap off the mouthpiece for top-fill or lift a silicone plug for side-fill. Both methods are simple enough for first-time users.
Sonder Q pods deliver convenience, compliance, and reliable performance. They suit beginners who want an easy setup and also appeal to experienced vapers who value flavour consistency and compatibility across the GeekVape Q-series.
Each GeekVape Q pod has a built-in mesh coil that provides consistent heating and reliable flavour. You can choose from four resistance levels, each offering a different balance of vapour, flavour, and draw style. Use the guide below to find the pod that matches your device and vaping preference.
The 0.6 Ω pod is the most versatile option in the range. It strikes a balance between flavour intensity and vapour output, making it a strong choice for all-day use. Many users prefer this pod with 50/50 freebase liquids or nicotine salts, as it delivers smooth flavour while maintaining a satisfying throat hit. If you’re not sure which pod to start with, the 0.6 Ω is a reliable pick.
The 0.8 Ω pod creates a tighter mouth-to-lung (MTL) draw that feels similar to smoking a traditional cigarette. This makes it especially appealing to new vapers or those who prefer a more restricted inhale. It pairs best with 50/50 e-liquids or nic salts, which enhance flavour without producing overwhelming clouds.
The 1.2 Ω pod is designed for vapers who enjoy a slower, more refined draw. It offers a smooth and highly restricted inhale, perfect for replicating the feel of smoking. This pod works best with high-PG blends or balanced 50/50 e-liquids, both of which provide sharper flavour delivery at lower wattages. If you want a cigarette-like experience, this pod is the right choice.
The 0.4 Ω pod caters to those who prefer restricted direct-to-lung (RDL) vaping. Operating at higher wattages, it produces thicker vapour and a warmer inhale compared to the MTL options. This version uses a side-fill design and is only compatible with certain devices, such as the Sonder Q2 and Wenax Q Ultra. For best results, use 50/50 or higher-VG e-liquids that can handle higher power levels.
This table makes it easy to compare each Q pod at a glance. You can see the resistance, filling style, recommended wattage range, and which type of e-liquid works best. Use it to pick the pod that matches your vaping style—whether you want a cigarette-like MTL draw, a smooth balance, or an airier RDL experience.
| Resistance | Fill Type | Style | Recommended E-liquid |
|---|---|---|---|
| 0.6 Ω | Top-fill | Balanced flavour/vapour | 50/50, nic salts |
| 0.8 Ω | Top-fill | Tighter MTL draw | 50/50, nic salts |
| 1.2 Ω | Top-fill | Classic MTL (cigarette-like) | High-PG, 50/50 |
| 0.4 Ω | Side-fill | RDL, bigger clouds | 50/50, high-VG |
GeekVape Q pods are built to work across the full Q-series line-up. You can choose a resistance option for a classic MTL draw or a more open RDL style, depending on how you like to vape. This wide compatibility removes the guesswork—most Q-series kits accept at least one, and often all, of the available resistance levels.
The 0.6 Ω, 0.8 Ω, and 1.2 Ω top-fill pods work with nearly all Q-series kits. That includes popular devices such as the Wenax Q, Wenax Q Pro, Wenax Q Ultra, Sonder Q, Sonder Q2, Aegis Q (AQ), Hero Q, and Digi Q. With these options, you only need to decide which resistance matches your preferred vaping style.
The 0.4 Ω pod is different. It uses a side-fill system and requires more power, so it’s not supported by every Q-series device. This pod is only compatible with the Wenax Q Pro, Wenax Q Ultra, and Sonder Q2. If you want to vape at 25–30 W with a restricted direct-to-lung draw, make sure you’re using one of these devices before ordering the 0.4 Ω option.
This matrix shows exactly which GeekVape Q pods work with each device in the Q-series. Each column lists a resistance option, while each row lists a compatible kit. The tick marks (☑) mean the pod works with that device, while empty boxes (☐) mean it doesn’t. Use the table to check your own kit and match it with the correct pod—so you can be sure you’re buying the right replacement first time.
| Device | 0.4 Ω Side-Fill | 0.6 Ω Top-Fill | 0.8 Ω Top-Fill | 1.2 Ω Top-Fill |
|---|---|---|---|---|
| Sonder Q | ☐ | ☑ | ☑ | ☑ |
| Sonder Q2 | ☑ | ☑ | ☑ | ☑ |
| Wenax Q | ☐ | ☑ | ☑ | ☑ |
| Wenax Q Pro | ☑ | ☑ | ☑ | ☑ |
| Wenax Q Mini | ☐ | ☑ | ☑ | ☑ |
| Wenax Q Ultra | ☑ | ☑ | ☑ | ☑ |
| Sonder Q Lite | ☐ | ☐ | ☐ | ☑ |
| Aegis Hero Q (AQ) | ☐ | ☑ | ☑ | ☐ |
| Aegis Hero 2 | ☐ | ☐ | ☐ | ☑ |
| Digi Q | ☐ | ☑ | ☑ | ☑ |
Refilling a Sonder Q pod is straightforward, but the steps differ for top-fill and side-fill versions. Doing it correctly helps prevent leaks, allows the coil to saturate properly, and keeps flavour consistent. After filling, let the pod rest for 5–10 minutes so the coil can prime fully and avoid burnt hits.
Top-fill pods are straightforward and beginner-friendly. They’re the most common option in the Sonder Q range and work best for everyday use.
Steps to refill a top-fill pod:
The 0.4 Ω pod uses a side-fill design, which suits higher wattages and restricted direct-to-lung vaping. While slightly different to fill, it’s still quick and mess-free when done correctly.
Steps to refill a side-fill pod:
The lifespan of a Sonder Q pod isn’t fixed—it varies with your vaping habits, the type of e-liquid you use, and the pod resistance. Each pod has a built-in mesh coil, so once flavour drops off, vapour becomes weak, or a burnt taste appears, it’s time to replace the pod with a fresh one.
GeekVape and independent reviewers generally estimate that a pod lasts for around 10 refills, which equals roughly 20 ml of e-liquid. For most vapers, this works out to about one week of use before performance starts to dip. This makes the pods cost-effective while still offering consistent flavour and vapour production during their usable life.
In practice, many users report achieving anywhere from 15 ml to 30 ml per pod, depending on how they vape. Heavier users often reach the lower end of that range, while lighter or more moderate users can extend pod life closer to 30 ml. This difference shows that real-world performance can exceed official estimates with careful use.
Several habits and choices can cause a pod to burn out faster:
For longer-lasting pods:
These small steps help maximise flavour, keep vapour smooth, and ensure each pod gives you the best possible lifespan.
Opening a Sonder Q pod depends on the type of pod in use—top-fill or side-fill.
Always let the pod sit for 5–10 minutes after opening and filling so the coil can soak up the e-liquid properly.
Refilling a Sonder Q pod is quick and mess-free. The method changes slightly between the top-fill and side-fill versions.
Pro Tip: Don’t overfill past the maximum line and always keep the pod upright during filling. This reduces the chance of leaks and extends pod life.
Choosing the right e-liquid ensures your Sonder Q pods last longer and deliver the flavour and vapour you expect. Each resistance works best with a certain type of blend.
All e-liquids for the UK market are TPD-compliant with bottles limited to 10 ml and a maximum strength of 20 mg nicotine. Only buy from trusted retailers, and remember these products are intended for adult smokers and vapers aged 18+. They’re not risk-free and should never be used by non-smokers or underage users.
| Geek Vape Sonder Q Vape Pods | |
|---|---|
| Resistance | 0.4 ohm | 2ml | Side Fill, 0.4 ohm | 3ml | Side Fill, 0.6 ohm, 0.6 ohm | 2ml | Side Fill, 0.6 ohm | 2ml | Top Fill, 0.6 ohm | 3ml | Side Fill, 0.8 ohm, 0.8 ohm | 2ml | Side Fill, 0.8 ohm | 2ml | Top Fill, 0.8 ohm | 3ml | Side Fill, 1.2 ohm, 1.2 ohm | 2ml | Side Fill, 1.2 Ohm | 2ml | Top Fill, 1.2 ohm | 3ml | Side Fill, Choose an Option |
| Pack Size | 3 Pack |
| Made In | China |
| Tank Capacity | 2ml |
639344f00ab12.png)
6393444c6f4e5.png)
63bbfc2ddf39c.png)
Not every pod fits every device. The 0.6, 0.8, and 1.2 Ω top-fill pods work across the full Q-series, while the 0.4 Ω side-fill pod is limited to higher-power kits such as the Wenax Q Pro, Wenax Q Ultra, and Sonder Q2. Check the compatibility matrix above to make sure you choose the right pod for your kit.
To open a top-fill pod, grip the black mouthpiece and snap it off. This exposes the fill port where you can add e-liquid. Once filled, snap the mouthpiece back firmly to secure it and prevent leaks.
Always fill below the maximum line to avoid oversaturation. After filling, press the cap or silicone plug firmly into place to seal the pod. Storing pods upright when not in use further reduces the risk of leaks.
Most users can expect around 10 refills or about 20 ml of e-liquid per pod. In real use, many vapers report getting 15–30 ml per pod, depending on the e-liquid used and how often they vape. Sweeter flavours and chain vaping usually shorten coil life, while lighter use can extend it.
For the 0.6, 0.8, and 1.2 Ω pods, the best choice is a 50/50 e-liquid or nicotine salts, which provide smooth flavour and consistent performance for MTL vaping. The 0.4 Ω pod works better with higher-VG blends at higher wattages, making it more suitable for restricted direct-to-lung use.
A burnt taste usually happens because the cotton wick inside the coil hasn’t absorbed enough liquid. If you start vaping too soon after a refill, the coil heats up a dry wick, which gives off a harsh, burnt flavour. To avoid this, always prime a new pod by letting it sit for 5–10 minutes after filling. If you’ve already primed the pod and the flavour still tastes burnt or muted, the coil has likely reached the end of its life and it’s time to replace the pod with a new one.
Yes, but used pods can’t go into standard household recycling. GeekVape Q pods contain both plastic and metal parts, which means they need to be handled through a WEEE recycling scheme or an e-waste collection service. Many local councils and supermarkets have battery and small electronics bins where pods can be safely disposed of. Recycling this way keeps materials out of landfill and ensures they are processed correctly.
You’ll know it’s time to replace your pod when flavour becomes noticeably weaker, vapour production drops off, or you get a burnt taste on every puff. Other clear signs include small leaks around the pod base or the wick turning dark inside the cartridge. If you notice any of these symptoms, swapping in a fresh pod restores flavour and performance instantly.
No. Sonder Q pods have integrated mesh coils that can’t be replaced separately. Once the coil inside has worn out, you replace the entire pod. This design simplifies maintenance, prevents coil-fitting mistakes, and ensures consistent performance each time you install a new pod.
For nicotine salts, the 0.8 Ω and 1.2 Ω top-fill pods are ideal. They run at lower wattages, which allows smooth flavour delivery and a comfortable throat hit without excessive vapour. These pods make nic salts feel strong and satisfying while keeping the draw closer to a traditional MTL style.
Freebase 50/50 e-liquids pair best with the 0.6 Ω pod, which balances flavour and vapour production. If you prefer high-VG freebase blends that are thicker and create denser clouds, the 0.4 Ω side-fill pod handles them better at its higher wattage range. Choosing the right liquid for each resistance helps preserve pod life and prevents leaks.
Sonder Q pods are designed with a leak-resistant structure, but no refillable pod is completely leak-proof. Overfilling past the line, leaving pods on their side, or using very thin liquids can increase the chance of leakage. To reduce risk, always fill to about 90% capacity, close the mouthpiece or silicone plug securely, and store pods upright when not in use.
Yes, as long as it meets UK TPD regulations. E-liquids are legally capped at 10 ml bottles with a maximum strength of 20 mg nicotine. This means you can use high-strength nic salts in Sonder Q pods, but anything above 20 mg isn’t legally sold in the UK market. Always buy from trusted, compliant retailers to ensure safety and authenticity.
Always wait at least 5–10 minutes after the first fill to allow the wick to fully absorb the liquid. This process, known as priming, ensures the coil doesn’t burn dry on your first puff. If you vape too quickly after filling, you risk damaging the coil permanently, which will shorten pod life and affect flavour.
Highly recommend these
Very good
amazing
amazing
Quick delivery
Pods are good
very good
Excellent
Fits and works fine
Excellent